G6 V6-3.9L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the generator upper bolt.
Tighten the bolts/stud to 50 Nm (37 lb ft).
4. Install the engine harness terminal (2).
5. Install the engine harness terminal nut (1).
Tighten the nut to 30 Nm (22 lb ft).
6. Position the generator rubber boot (3).
7. Connect the engine harness electrical connector.
8. Install the drive belt. Refer to Drive Belt Replacement (Coupe) (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair/Drive Belt Replacement (Coupe))Drive Belt Replacement (Convertible) (See: Engine, Cooling and
Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Drive Belt Replacement (Convertible)).
9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Service and
