G6 V6-3.9L (2009)
6. Install the 2 power steering gear inlet pipe routing pin-style retainers (1) to the right side of the frame.
7. Install the right front tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
8. Lower the vehicle.
9. Place the clamp (1) on the power steering gear outlet pipe (3) and install the gear outlet pipe (3) to the power steering reservoir inlet pipe (2).
10. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair) for 3.5L engine or Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair) for 3.9L engine.
11. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).
