G6 V6-3.9L (2009)
Oil Feed Pipes Replacement
Removal Procedure
Warning
Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional
support for the vehicle on the opposite end from which the components are being removed.
1. Position the vehicle on a hoist and raise the vehicle.
2. Remove the transaxle oil pan. Refer to Oil Pan Replacement (See: Fluid Pan/Service and Repair/4T45-E - Automatic Transmission).
3. Remove the oil level control valve. Pull the valve straight down. Do not pry on the valve.
4. Remove the oil filter and oil filter O-ring seal. The seal may stay in the case when the filter is removed.
Note: Do not score or damage the transaxle case when removing the filter neck seal.
5. Using a chisel, indent the top of filter neck seal to relax the press fit.
6. Remove the filter neck seal from the transaxle case.
