G6 V6-3.9L (2009)
6. Disconnect the transaxle shift control cable terminal (1) from the shift lever pin.
7. Release the transaxle shift control cable retainer (2) and remove the transaxle range selector cable from the transaxle control lever base.
8. Remove the transaxle shift control cable grommet from the cowl panel.
9. Remove the transaxle shift control cable from the vehicle.
Installation Procedure
1. Guide the transaxle shift control cable through the pass-through in the cowl panel.
2. Secure the transaxle shift control cable grommet by pressing the grommet into the pass-through hole in the cowl panel.
