G6 V6-3.9L (2009)
Shift Cable Adjuster Lock Inspection
1. Park the vehicle on a flat secure surface with the shifter in the PARK position.
2. Disengage the shift cable adjuster lock.
3. Turn the transmission side manual shaft lever counterclockwise and then release the lever to ensure that the transmission manual shaft is in the
PARK position fully.
4. Push the shift cable adjuster lock down to fully engage the adjuster lock.
Warning
In the extremely rare event that the adjuster lock becomes disengaged, replace the shift cable. Refer to Floor Shift Control Cable Replacement (Cobalt,
G5, HHR, Malibu) or Range Selector Lever Replacement (Acadia, Aura, Enclave, G6, Outlook, Traverse) in SI.
5. Apply a LIGHT vertical (upward) force with 2 fingers to the sides of the adjuster locking clip engagement legs. Refer to illustration. Push the shift
cable adjuster lock down fully one more time to ensure complete lock engagement.
6. Move the shifter back and forth from PARK to N or L 3 times.
7. Verify that the vehicle shift system operates correctly.
Courtesy Transportation - For US and Canada
The General Motors Courtesy Transportation program is intended to minimize customer inconvenience when a vehicle requires a repair that is covered
by the New Vehicle Limited Warranties. The availability of courtesy transportation to customers whose vehicles are within the warranty coverage period
and involved in a product program is very important in maintaining customer satisfaction. Dealers are to ensure that these customers understand that
shuttle service or some other form of courtesy transportation is available and will be provided at no charge. GM dealers should refer to the General
Motors Service Policies and Procedures Manual for Courtesy Transportation guidelines. Saturn Canada retailers should refer to applicable Home Office
letter on this subject.
Claim Information - GM, Saturn Canada Only
Submit a Product Recall Claim with the information indicated below:
