G6 V6-3.9L VIN 1 (2006)
7.
Install the mirror and cover assembly to the sunshade. Apply pressure to the edge of the assembly to engage the 4 retainers to the sunshade as
shown in the illustration above.
8.
Connect the electrical connector for the mirror lamps.
9.
Install the sunshade and the screws.
Tighten
Tighten the sunshade screws to 2.5 N.m (22 lb in).
10.
Install the fastener cover and place the sunshade back into the retainer.
11.
Repeat the appropriate procedure (illuminated or non-illuminated) on the passenger side.