G6 V6-3.9L VIN 1 (2006)
Remove the hydraulic cylinder from the bell crank assembly by pulling it out toward the passenger side of the vehicle. Install the hydraulic cylinder into
the bell crank assembly.
Install the J-clips and pins to the latch assembly.
Align the bell crank bracket to the front of the roof panel. Use the position marks created in Step 5. Install the three M6 10 mm (25/64 in) bolts to the
bell crank bracket.
Tighten
Tighten the M6 bolts to 10 N.m (89 lb in).