G6 V6-3.9L VIN 1 (2006)
5. Pull forward and turn outward to release the sunshade from the tracks.
6. Roll the sunshade rearward over the front edge of the sunroof support.
7. Remove the end cap (1) on the left side that holds the sunshade spring in place.
8. Remove the sunshade from the sunroof assembly.
Installation Procedure
Important: If the sunshade spring releases, Refer to Reinstall within this cell.
A new sunshade service part comes pre-loaded with a pin tool holding spring tension on the sunshade.
1. Install the sunshade roller to the end plate, allowing the pin to be expose through the end plate.
2. Install the sunshade to the sunroof assembly.