G6 V6-3.9L VIN 1 (2006)
Important: Do NOT tighten the sunroof window actuator screws all way down before inspecting the alignment of the sunroof window.
Maintain a 4.00 mm (0.16 inch) gap clearance around the sunroof window edges.
2. Install the sunroof window front actuator screws. Do NOT tighten the screws.
3. Carefully close the sunroof window from the vent position to the full closed position.
4. Adjust the front sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment (C3Y) Sunroof Window Height and Opening Fit
Adjustment (CF5).
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the front sunroof window actuator screws to the left and right sides.
Tighten the screws to 4 N.m (35 lb in).
6. Install the sunroof window side actuator front covers to the left and right sides.
7. Close the sunshade.
8. Cycle the sunroof window to ensure proper operation and fit.