G6 V6-3.9L VIN 1 (2006)
7. Pull the sunroof window seal back from under the roof edge, using a suitable tool, refit sunroof window seal into the gutter.
8. Correct position.
9. With the sunroof closed, gently pry the sunroof window seal out towards the center of the sunroof opening
10. Run a business card or a similar item around the sunroof window seal, look for even tension around the seal.
11. The sunroof window seal will unstuck and expand outward to make a seal.
12. If it is found the sunroof window seal is not rolled over, meaning that "fluffing" was ineffective and the sunroof window seal still appears to be low
in relation to the metal opening, adjustment to the sunroof module may be necessary. Refer to Sunroof Module Adjustment.
