G6 V6-3.9L VIN 1 (2006)
13. If the sunroof window seal appears low along the front, adjust the four fasteners/tolerance compensators along the front. Refer to Sunroof Module
Assembly Replacement (CF5) Sunroof Module Assembly Replacement (C3Y).
IMPORTANT: Do not adjust the leveling retainers located at the four corners of the module unless the sunroof window panels are not 1 mm lower
than the roof line.
14. If vehicle is equipped with the center brackets (1) follow the remaining steps If not refer to step 20.
-
Loosen the four fasteners/tolerance compensators along the front. "Back off" the tolerance compensators by turning them down with your
finger tips the necessary amount. Sunroof Module Adjustment.
-
Push up on the front rail of the module while tightening the front fasteners.
-
Pushing up will close the gap and the tolerance compensators will not extend as far thus compressing the seal more.
