G6 V6-3.9L VIN 1 (2006)
Important: Do not adjust the leveling retainers located at the four corners of the module unless the sunroof window panels are not 1 mm
lower than the roof line.
13. If the sunroof window seal appears low along the front, adjust the four fasteners/tolerance compensators along the front. Refer to Sunroof Module
Assembly Replacement (CF5) Sunroof Module Assembly Replacement (C3Y).
14. If vehicle is equipped with the center brackets (1) follow the remaining steps If not refer to step 20.
*
Loosen the four fasteners/tolerance compensators along the front. "Back off" the tolerance compensators by turning them down with your
finger tips the necessary amount. Sunroof Module Adjustment.
*
Push up on the front rail of the module while tightening the front fasteners.
*
Pushing up will close the gap and the tolerance compensators will not extend as far thus compressing the seal more.
