G6 V6-3.9L VIN 1 (2006)
1. Notice: This is a self-retaining fastener joint that does not require thread locking compounds. Do not attempt to clean the threads with a standard
tap. If a standard tap is used, damage to the joint threads will occur.
Notice: Refer to Fastener Notice in Service Precautions.
Install the brake caliper mounting bracket to the steering knuckle.
2. Install the brake caliper mounting bracket bolts (1).
Tighten the bolts to 115 Nm (85 ft. lbs.).
3. Apply a very thin coating of high temperature silicone brake lubricant to the pad hardware mating surfaces (1) of the caliper bracket only.
4. Clean the brake pad mating surfaces of the brake pad retainers (2).
5. Install the brake pad retainers (2) to the brake caliper bracket.
