G6 V6-3.9L VIN 1 (2006)
1. Install the brake caliper bracket.
2. Notice: This is a self-retaining fastener joint that does not require thread locking compounds. Do not attempt to clean the threads with a standard
tap. If a standard tap is used, damage to the joint threads will occur.
Notice: Refer to Fastener Notice in Service Precautions.
Install the brake caliper mounting bracket bolts (2).
Tighten the brake caliper mounting bracket bolts to 115 Nm (85 ft. lbs.).
3. Install the brake pad retainers (2) to the brake caliper bracket (3).
4. Install the brake pads (1) to the brake caliper bracket (3).
5. Install the brake caliper.
