G6 V6-3.9L VIN 1 (2006)
set this disengagement reason.
Two Commands: The PCM/ECM detects that the Set/Coast switch and the Resume/Accel switch are active at the same time.
Two CC Commands: The PCM/ECM detects that the Set/Coast switch and the Resume/Accel switch are active at the same time.
Under Speed: The PCM/ECM detects that the vehicle speed is less than the cruise memory speed by more than a calibrated amount.
Under Set Speed: The PCM/ECM detects that the vehicle speed is less than the cruise memory speed by more than a calibrated amount.
Scan Tool Data List
SCAN TOOL DATA LIST
Body And Accessories
The scan tool data lists contain all of the cruise control related parameters that are available on the scan tool. The parameters in the list are arranged in
alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures
with Diagnostic System Check - Vehicle.
Use the scan tool data lists only after the following is determined:
-
There is no published DTC procedure nor published symptom procedure for the customer concern.
-
The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table.
Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
