G6 V6-3.9L VIN 1 (2006)
1. Install a NEW gasket to the catalytic converter studs.
2. Install the right catalytic converter (3).
Notice: Refer to Fastener Notice.
3. Install the catalytic converter bolt (4) and nuts (1) at the exhaust manifold.
Tighten the nuts to 31 Nm (23 ft. lbs.).
4. Install the left catalytic converter to right catalytic converter nuts (3). (Powertrain shown removed for clarity).
Tighten the nuts to 31 Nm (23 ft. lbs.).
