G6 V6-3.9L VIN 1 (2006)
8. Remove the upper exhaust manifold bolts.
9. Remove the right catalytic converter.
10. Remove the lower exhaust manifold bolt.
11. Remove the exhaust manifold.
12. Remove and discard the exhaust manifold gasket.
Installation Procedure
1. Install a NEW exhaust manifold gasket onto the cylinder head studs.
2. Install the exhaust manifold.
3. Notice: Refer to Fastener Notice.
Install the exhaust manifold bolts.
Tighten the bolts to 20 Nm (15 ft. lbs.).
4. Install the right catalytic converter.
