G6 V6-3.9L VIN 1 (2006)
Air Door Actuator / Motor: Service and Repair
HVAC System - Automatic
Recirculation Actuator Replacement
RECIRCULATION ACTUATOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuse labeled HVAC CTRL (BATT).
2. Remove the right closeout panel.
3. Remove the communication interface module.
4. Remove the OnStar module bracket.
5. Remove the recirculation door actuator screws.
6. Remove the recirculation door actuator.
7. Remove the recirculation door actuator wire harness connector.
INSTALLATION PROCEDURE
1. Install the recirculation door actuator wire harness connector.