G6 V6-3.9L VIN 1 (2006)
7. Position the headlamp assembly to the vehicle. Lift the headlamp upward to release the locating tab to the front edge of the fender.
8. Install the bolts to the headlamp assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 2 N.m (18 lb in).
9. Install the push-in-retainers across the front fascia.
10. Close the hood.
11. Inspect the headlamp alignment. Adjust the headlamp alignment, if necessary. Refer to Headlamp Aiming.
