pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Fluid - M/T|Capacity Specifications|Page 3493 > < Fluid - M/T|Capacity Specifications|Page 3491
Page 1
background image

Fluid - M/T: Service and Repair

 

Transmission Fluid Replacement

1. Important To ensure that all sediment within the transaxle is suspended in the fluid, the fluid should only be drained after it has reached a normal

operating temperature of 88-93°C (190-200°F). Normal operating temperature is reached after approximately 25 km (15 miles) of highway
driving.

Raise and support the vehicle. 

2. Caution The transaxle fluid is hot. Caution must be taken to prevent personal injury when the transaxle fluid drains from the transaxle.

Remove the transaxle drain plug (1) and allow the transaxle to drain completely.

3. Notice Refer to Fastener Notice in Service Precautions.

Clean and install the transaxle drain plug.

Tighten the transaxle drain plug to 50 Nm (37 lb ft).

4. Lower the vehicle.

Fluid - M/T|Capacity Specifications|Page 3493 > < Fluid - M/T|Capacity Specifications|Page 3491