G6 V6-3.9L VIN 1 (2006)
Knock Sensor: Service and Repair
Knock Sensor (KS) Replacement - Bank 1
KNOCK SENSOR (KS) REPLACEMENT - BANK 1
REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the knock sensor electrical connector (2).
3. Loosen and remove the knock sensor.
INSTALLATION PROCEDURE
IMPORTANT: DO NOT apply thread sealant to the sensor threads. The sensor threads are coated at the factory. Applying additional sealant affects
the sensors ability to detect detonation.