G6 V6-3.9L VIN 1 (2006)
Tighten the sensor to 42 N.m (30 lb ft) using the J 39194-B.
3. Connect the HO2S (4) electrical connector.
4. Install the CPA retainer (5).
5. Install the HO2S clip (3) to the oil level indicator tube bracket.
Tighten the sensor to 42 N.m (30 lb ft) using the J 39194-B.
3. Connect the HO2S (4) electrical connector.
4. Install the CPA retainer (5).
5. Install the HO2S clip (3) to the oil level indicator tube bracket.