G6 V6-3.9L VIN 1 (2006)
Catalytic Converter: Service and Repair
Catalytic Converter Replacement - Right (3.9L W/RPO M15)
Catalytic Converter Replacement - Right (3.9L w/RPO M15)
Tools Required
^
J39194-B Heated Oxygen Sensor Wrench
Removal Procedure
1. Remove the muffler assembly.
2. Remove the connector position assurance (CPA) retainer (1).
3. Important: The heated oxygen sensor (HO2S) 2 uses a permanently attached pigtail and connector. This pigtail should not be removed from the
sensor. Damage or removal of the pigtail or connector will affect proper operation of the sensor.
Disconnect the lower right HO2S electrical connector (2).
4. Remove the lower right HO2S (2) using the J39194-B.