G6 V6-3.9L VIN 1 (2006)
Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the positive crankcase ventilation (PCV) fresh air tube from the air cleaner intake duct.
2. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector.
3. Loosen the clamps and remove the air cleaner intake duct with the MAF/IAT sensor from the throttle body and the air cleaner housing cover.
4. Loosen the clamp and remove the MAF/IAT sensor from the air cleaner intake duct.
INSTALLATION PROCEDURE
