G6 V6-3.9L VIN 1 (2006)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor (HO2S) Replacement Bank 2 Sensor 1
HEATED OXYGEN SENSOR (HO2S) REPLACEMENT BANK 2 SENSOR 1
TOOLS REQUIRED
J 39194-B Heated Oxygen Sensor Wrench
REMOVAL PROCEDURE
NOTICE: Refer to Heated Oxygen Sensor (HO2S) Resistance Learn Reset Notice.
1. Remove the intake manifold cover.
2. Remove the connector position assurance (CPA) retainer (2).
3. Disconnect the heated oxygen sensor (HO2S) (1) electrical connector.
4. Remove the HO2S clip from the ignition control module bracket.
