G6 V6-3.9L VIN 1 (2006)
damage to parts and systems.
3. Install the power steering gear mounting bolts, nuts and washers to the power steering gear.
Tighten
Tighten the mounting bolts, nuts to 110 Nm (81 lb ft).
4. Convertible vehicles, install the rear cradle/frame mounting bolts.
Tighten
Tighten the rear cradle/frame mounting bolts to 100 Nm (73 lb ft) plus 180 degree rotation.
5. Convertible vehicles, remove the jack stand.
6. Install the power steering gear outlet pipe routing pin-style retainer to the RH rear side of the cradle/frame.
