G6 V6-3.9L VIN 1 (2006)
Tie Rod End: Service and Repair
Rack and Pinion Outer Tie Rod End Replacement
Tools Required
^
J24319-B Tie Rod Separator
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Loosen the outer tie rod to inner tie rod jam nut.
4. Remove the outer tie rod to steering knuckle prevailing nut. Discard the nut.
5. Notice: Do not free the ball stud by using a pickle fork or a wedge-type tool. Damage to the seal or bushing may result.
Using the J24319-B, separate the tie rod from the steering knuckle.
6. Remove the outer tie rod from the inner tie rod.
Installation Procedure