G6 V6-3.9L VIN 1 (2006)
4. Install the oil feed pipe assembly.
5. Notice: Refer to Fastener Notice in Service Precautions.
Hand start the oil feed pipe assembly bolts.
Tighten the oil feed pipe assembly bolts to 12 Nm (9 ft. lbs.).
6. Install the new filter neck seal into the transaxle case. A large socket can be used as an installation tool. Two mallets can be used as well.
7. Coat the filter O-ring seal with a small amount of petroleum jelly, and install the filter into the transaxle case.
8. Notice: Push straight down on the center of the oil level control valve in order to prevent damage to the case bore.
