G6 V6-3.9L VIN 1 (2006)
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the transaxle mount into the vehicle and tighten the bolts.
Tighten the transaxle mount bolts to 90 Nm (66 ft. lbs.).
2. Install the transaxle mount through bolt.
Tighten the transaxle mount through bolt to 90 Nm (66 ft. lbs.).
3. Lower the vehicle.
Transmission Mount Replacement - Rear
Transmission Mount Replacement - Rear
Removal Procedure
1. Raise and support the vehicle.
2. Remove the left tire and wheel.
3. Using a suitable jack stand, support the rear of the powertrain.