G6 V6-3.9L VIN 1 (2006)
Transmission Pressure Test Port: Service and Repair
Oil Pressure Test Plug Replacement
Removal Procedure
1. Remove the air cleaner intake duct.
2. Remove the line pressure pipe plug (38).
Installation Procedure
1. Apply GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the line pressure pipe plug.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the line pressure pipe plug (38).
Tighten the plug to 11 Nm (97 inch lbs.).
3. Install the air cleaner intake duct.
