G6 V6-3.9L VIN 1 (2006)
10. Hand start the bolts.
Tighten the control valve body bolts to 12 Nm (9 ft. lbs.).
11. Connect the transaxle wiring harness to the following components:
^
TFP switch assembly
^
Pressure control solenoid (red connector)
^
Important: The 1-2 shift solenoid wires are red and green. The 2-3 shift solenoid wires are red and yellow.
1-2 shift solenoid
^
2-3 shift solenoid
^
TCC solenoid