G8 V6-3.6L (2008)
Important: The door striker to pillar retaining screws (1) must not be fully tightened at this stage.
Important: Align the door striker (2) to the marks made to the pillar (3) prior to removal.
1. Install the door striker to pillar retaining screws (1).
Caution: Striker alignment is crucial for proper operation of the door systems. Do not hit the striker with a hammer or force alignment in any
other way. Failure to properly adjust striker will result in excessive door efforts or extensive damage to door system operation which could result
in personal injury.
2. Align the door striker (2). Refer to Door Lock Striker Adjustment (See: Adjustments) in Doors.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Tighten the door striker (2) to pillar retaining screws (1).
Tighten the door striker screws to 13 N-m (115 lb in).
