G8 V6-3.6L (2008)
Hood Hinge: Service and Repair
Hood Hinge Replacement
Removal Procedure
1. Apply tape to the corners of the panels and adjacent surfaces.
Important: When a suitable hold open device is being removed or installed, provide alternate support to avoid the possibility of damage
to the vehicle or personal injury.
2. Remove the hood. Refer to Hood Replacement (See: Service and Repair) .
3. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (See: Cowl/Cowl Moulding / Trim/Service and Repair) .
4. Remove the hood hinge to dash and cowl panel brace retaining bolts (1).
5. Remove the hood hinge (2) from the vehicle.
Installation Procedure
