G8 V6-3.6L (2008)
16. Inspect the brake caliper (2) and brake caliper anchor plate (4) for the following:
*
Bent or damaged brake caliper anchor plate (4).
*
Excessive brake caliper guide pin (3) play in the brake caliper anchor plate (4).
*
Excessive brake caliper guide bolt (1) play in the brake caliper (2).
*
Corrosion.
*
Cracks.
*
Damage.
*
Excessive wear.
17. If any of the conditions listed are found, replace the brake caliper (2).
18. Inspect the brake caliper piston dust boot seals (2) for cracks, tears, cuts, deterioration and/or incorrect seating in the brake caliper (1). If any of
these conditions are present, the brake caliper requires overhaul or replacement.
19. Inspect for brake fluid leakage around the brake caliper piston dust boot seals (2) and on the brake pads. If there is any evidence of brake fluid
leakage, overhaul or replace the brake caliper (1).
