G8 V6-3.6L (2008)
2. Install the brake pedal push rod (3), clip (2) and brake pedal push rod retaining bolt (1) to the brake pedal (4).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the vacuum brake booster to brake pedal support bracket retaining nuts (1).
Tighten the nuts to 23 N.m. (17 lb ft
4. Install the vacuum hose and check valve to the vacuum brake booster. Refer to Power Brake Booster Inlet Hose Replacement (6.0L Engine) (See:
Hydraulic System/Brake Hose/Line/Service and Repair/Power Brake Booster Inlet Hose Replacement (6.0L Engine))Power Brake Booster Inlet
Hose Replacement (3.6L Engine) (See: Hydraulic System/Brake Hose/Line/Service and Repair/Power Brake Booster Inlet Hose Replacement
(3.6L Engine)) .
5. Install the master cylinder to the vacuum brake booster. Refer to Master Cylinder Replacement (See: Hydraulic System/Brake Master