G8 V6-3.6L (2008)
11. Disconnect the liquid pipe (1) from the condenser port (3).
Important: The sealing washer (2) is a single use item and must be discarded after use.
12. Remove the sealing washer (2). Refer to Sealing Washer Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair/Sealing
Washer Replacement) .
Discard the sealing washer
Important: Cover any opening of the A/C system with a suitable cap or tape immediately, to prevent absorption of moisture from the
atmosphere.
13. Cap or plug the liquid pipe (1) and the condenser port (3).
14. Lower the vehicle.
Important: Gently push the radiator and condenser towards the engine to allow removal of the discharge pipe to condenser retaining nut
(1).
15. Remove the discharge pipe to condenser retaining nut (1).
