G8 V6-3.6L (2008)
Caution: Refer to Installing Hoses without Twists or Bends Notice (See: Service Precautions/Vehicle Damage Warnings/Installing Hoses
without Twists or Bends Notice) .
Caution: Refer to Safety Glasses Caution (See: Service Precautions/Technician Safety Information/Safety Glasses Warning) .
1. Install the inlet hose (2).
2. Secure the inlet hose (2) at both ends, by opening the retaining hose clamps (1) and sliding them over the hose (2).
3. Install the mass air flow meter. Refer to Mass Airflow Sensor with Intake Air Temperature Sensor Replacement (See: Powertrain
Management/Computers and Control Systems/Air Flow Meter/Sensor/Service and Repair) .
4. Install the air intake duct. Refer to Air Cleaner Inlet Duct Replacement (See: Filters/Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair) .
5. Install the radiator air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (See: Engine, Cooling and
Exhaust/Cooling System/Radiator/Service and Repair) in Body Front End.
6. Install the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement) in Engine Mechanical - 3.6L.
7. Fill the cooling system. Refer to Cooling System Draining and Filling (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair) .
8. Inspect cooling system for leaks.