G8 V6-3.6L (2008)
Important: Wheel studs are the only serviceable item of the front wheel hub assembly.
1. Install the hub assembly (1) to the steering knuckle (3).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
Important: After a hub assembly is replaced, the end-float measurement must be checked. Refer to Front Wheel Hub Assembly
Inspection (See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General Diagnostics/Front Wheel Hub
Assembly Inspection)
2. Install the NEW hub assembly to steering knuckle retaining bolts (2).
Tighten the bolts to 107.5 N.m (79 lb ft).
