G8 V6-3.6L (2008)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Replacement - Bank 2 Sensor 1
Heated Oxygen Sensor Replacement - Bank 2 Sensor 1
Removal Procedure
Caution: Refer to Safety Glasses Caution (See: Service Precautions/Technician Safety Information/Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (See: Maintenance/Vehicle Lifting/Service Precautions) .
1. Ignition Off.
2. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
3. Remove the HO2S electrical connector from the wiring harness bracket (1).
Notice: Refer to Heated Oxygen and Oxygen Sensor Notice (See: Service Precautions/Heated Oxygen and Oxygen Sensor Notice) .
4. Disconnect the heated oxygen sensor (HO2S) electrical connector (2).
