G8 V6-3.6L (2008)
6. Attach the electrical connector (1) to the right hand rail (2).
7. Connect the wheel speed sensor jumper harness electrical connector (1).
8. Install the rear wheels. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
9. Lower the vehicle.
10. Use the scan tool in order to clear any DTCs.
11. Perform the System Check-Vehicle. Refer to Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnostic System Check - Vehicle) ..
