G8 V6-3.6L (2008)
2. Connect the SIR coil assembly connectors, (1) to (2).
3. Install the wipers/washer switch. Refer to Windshield Wiper and Washer Switch Replacement (See: Sensors and Switches/Sensors and Switches -
Wiper and Washer Systems/Windshield Washer Switch/Service and Repair) .
4. Install the cruise control switch. Refer to Turn Signal Switch Replacement (See: Lighting and Horns/Sensors and Switches - Lighting and
Horns/Turn Signal Switch/Service and Repair) .
5. Remove the SIR coil assembly securing tape.
6. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering Column/Service and Repair/Steering
Column Trim Cover Replacement) .
7. Install the steering wheel. Refer to Steering Wheel Replacement (See: Steering Column/Service and Repair/Steering Wheel Replacement) .
8. Install the inflatable restraint steering wheel module to the steering wheel. Refer to Steering Wheel Inflatable Restraint Module Replacement (See:
Restraint Systems/Air Bag Systems/Air Bag/Service and Repair) .
9. Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair) .
10. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Steering Column/Air Bag(s) Arming and Disarming/Service and Repair) .
11. Calibrate the steering angle sensor. Refer to Steering Angle Sensor Centering (See: Brakes and Traction Control/Antilock Brakes / Traction
Control Systems/Steering Angle Sensor/Service and Repair) .
