G8 V6-3.6L (2008)
Shift Solenoid: Service and Repair
5L40-E/5L50-E - Automatic Transmission
1-2 Shift Solenoid Valve Replacement
1-2 Shift Solenoid Valve Replacement
Removal Procedure
1. Remove the transmission fluid pan. Refer to Automatic Transmission Fluid and Filter Replacement (See: Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement) .
2. Disconnect the electrical connector (2) from the 1-2 shift solenoid (1).
3. Using a suitable tool, remove the 1-2 shift solenoid retainer from the control valve body.
4. Remove the 1-2 shift solenoid (7) from the control valve body.
5. Remove the O-ring seals (4-5) from the 1-2 shift solenoid (7) ONLY if the O-rings are cut or worn.
Installation Procedure