G8 V8-6.0L (2009)
14. Repeat steps 12 and 13 until a firm brake pedal is obtained. This will correctly seat the brake caliper pistons and brake pads.
15. Fill the master cylinder reservoir to the correct level. Refer to Master Cylinder Reservoir Filling (See: Brake Master Cylinder/Service and
Repair/Procedures/Master Cylinder Reservoir Filling).
16. Burnish (bed in) the brake pads and brake discs if required. Refer to Brake Pad and Rotor Burnishing (See: Disc Brake System/Brake
Pad/Service and Repair/Brake Pad and Rotor Burnishing).
