G8 V8-6.0L (2009)
2. Connect the lower control arm (3) to the knuckle (4).
Note: The lower control arm to knuckle arm retaining bolt (2) and nut (1) must not to be fully tightened at this stage.
3. Install the lower control arm to knuckle retaining bolt (2) and NEW nut (1).
Do not fully tighten at this stage.
4. Install the rear wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
5. Remove the safety stands.
6. Lower the vehicle to the ground.
7. Bounce the vehicle several times to settle the suspension.
