pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Radio, Stereo, and Compact Disc|Speaker > < Diagram Information and Instructions|Page 6992
Page 1
background image

Radio/Stereo: Service and Repair
Radio Replacement

1. Disconnect battery ground cable.
2.

Remove three lower left hand sound insulator attaching screws.
3. Disconnect cruise control module electrical connector and lamp, then remove left hand sound insulator panel.
4. Remove DLC connector attaching screws, then remove steering column filler panel attaching screws and filler panel.
5. Open upper instrument panel compartment door, then remove four compartment to instrument panel attaching screws.
6. Remove upper instrument panel compartment from instrument panel.
7. Press release tab upward, then remove lower instrument panel compartment door.
8. Remove lower instrument panel compartment to instrument panel attaching screws, then disconnect electrical connector and remove compartment.
9. Remove right hand instrument panel trim plate attaching screws.

10. Carefully pull right hand instrument panel trim plate rearward to disengage retaining clips, then remove trim panel.
11. Remove radio upper retaining nuts.
12. Pull radio rearward and disconnect electrical connectors and antenna lead.
13. Remove radio from instrument panel.
14. Reverse procedure to install.

Radio, Stereo, and Compact Disc|Speaker > < Diagram Information and Instructions|Page 6992