Grand AM L4-138 2.3L DOHC VIN D MFI (1994)
Brake Warning Indicator: Initial Inspection and Diagnostic Overview
System Diagnosis
SYSTEM DIAGNOSIS
^
Perform the System Check See: System Checkand refer to the Symptom Table See: Symptom Related Diagnostic Procedures/Symptom Tablefor
the appropriate diagnostic procedures.
System Check
Troubleshooting Hints
TROUBLESHOOTING HINTS (Perform before beginning System Diagnosis)
1. Check GAGES Fuse by observing Malfunction Indicator Lamp with Ignition Switch in "RUN" and engine off.
2. If BRAKE Indicator does not light for a particular condition, check suspect switch for battery voltage at CKT 33 (TAN/WHT) terminal and a
good ground circuit. If wires are good to suspect switch, replace suspect switch.
^
Refer to System Diagnosis. See: System Diagnosis
