Grand AM L4-138 2.3L DOHC VIN D MFI (1994)
Fuel Rail Assembly
DISASSEMBLY
1. Remove the pressure regulator retaining screws.
2. Remove the pressure regulator assembly from the fuel rail.
^ Twist back and forth while pulling apart.
3. Remove the regulator retainer.
4. Remove the fuel rail to regulator base seal, and discard.
ASSEMBLY
1. Lubricate the new fuel rail to the fuel regulator base seal with clean engine oil, and install it in the regulator.
2. Install the regulator retainer.
3. Position the fuel regulator assembly on the fuel rail.
NOTE: If there is not enough thread locking material on the threads of the reusable hardware to insure proper locking, apply Loctite 262 or
equivalent.
4. Tighten the pressure regulator screws to 11.5 N-m (102 lb. in).