pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Gear Tension Relief Sequence (with ABS)|Page 4992 > < Gear Tension Relief Sequence (with ABS)|Page 4990
Page 1
background image

Brake Master Cylinder: Service and Repair
Master Cylinder Replace

1. Disconnect wire connector from brake warning pressure switch, if equipped.
2. Disconnect brake lines from master cylinder.
3. Remove master cylinder mounting nuts, then the master cylinder.
4. On models with separate fluid reservoirs, remove reservoir.
5. On all models, reverse procedure to install, noting the following:

a. Refer to Master Cylinder Push Rod for procedures on push rod adjustments.
b. Bleed brakes as described under Brake Bleeding. Refer to Brakes/Service and Repair.

Gear Tension Relief Sequence (with ABS)|Page 4992 > < Gear Tension Relief Sequence (with ABS)|Page 4990