Grand AM L4-138 2.3L VIN A MFI (1992)
Fuel Rail Assembly
13. Fuel rail to camshaft housing bolts and tighten to 26 Nm (19 lbs. ft.).
14. Fuel line retaining clamp and retainer to bracket on top of cam housing.
15. Vacuum line to fuel pressure regulator.
16. Fuel injector harness connector.
17. Oil/air separator assembly (it may be necessary to lubricate the hoses for ease of assembly).
18. Lube inner sealing surface of camshaft seal with clean engine oil and install seal into camshaft housing using J 36009 or equivalent.
19. Power steering pump drive pulley onto intake camshaft using J 36015 or equivalent.
Power Steering Pump Mounting
20. Power steering pump assembly.
21. Power steering drive belt and tension to specification. Refer to Drive Belt. See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt
22. Throttle lever actuator power steering pressure switch connector.
23. Reinstall any spark plug boot connector assembly that stuck to a spark plug back onto the ignition coil and module assembly.
