Grand AM L4-138 2.3L VIN A MFI (1992)
Neutral Safety Switch: Technical Service Bulletins
Park/Neutral Switch - Revised Replacement Procedures
Bulletin Number: 93-7-24
Reference Number: 337105
Publish Date: 8/93
Subject:
SERVICE MANUAL UPDATE - SECTION 7A -
REVISED PARK/NEUTRAL POSITION SWITCH
REMOVAL AND INSTALL PROCEDURE
Models Affected:
1992-93 GRAND AM MODELS
ENGINE APPLICATION:
3300 (3.3L) engine
(VIN N - RPO LG7) (3T40 Transmission)
This bulletin replaces the "Park/Neutral Position Switch" procedure in
Section 7A of the 1992 and 1993 service manuals.
The following procedure should be used:
Remove Or Disconnect
1.
Raise vehicle and suitably support, refer to Section 0A.
2.
Lower heater pipe bracket bolt.
3.
Position vacuum hose aside.
4.
Lower vehicle.
5.
Pry off shift linkage.
6.
Electrical connectors.
7.
Park neutral position switch.
Install Or Connect
1.
Park/neutral position switch.
2.
Electrical connector.
3.
Shift linkage.
4.
Raise vehicle.
5.
Vacuum hose.
6.
Lower heater pipe bracket bolt.
7.
Lower vehicle.
Labor Operation Number: J6383
